VocoPro DTX-9909K owner manual Getting Connected cont, Connecting to the FRONT speaker terminals

Getting Connected cont.

Determining the proper way to connect the speaker cables:

The speaker cable is a pair of insulated cables running side by side. One cable is colored or shaped differently , perhaps with a stripe, groove or ridges.

1.Connect one end of the striped (grooved, ridged, etc.) cable to the “+” (red) terminal on the rear panel of the DTX-9909K.

2.Connect the other end of the striped (grooved, ridged, etc.) cable to the “+” (red) terminal on the speaker.

3.Connect one end of the “plain” (NO stripes, grooves, ridges, etc.) cable to the “--” (black) terminal on the rear panel of the DTX-9909K.

4.Connect the other end of the “plain” (NO stripes, grooves, ridges, etc.) cable to the “--” (black) terminal on the speaker

�������������

��������������������

Connecting to the FRONT speaker terminals:

Connect a pair of front-positioned speakers to the “+” and “--” FRONT terminals on the rear panel of DTX-9909K following steps 1-5 on page 12

��������������������

Connecting to the CENTER speaker terminals:

Connect a center-positioned speaker to the “+” and “--” CENTER terminals on the rear panel of DTX-9909K following steps 1-5 on page 12

��������������������

Connecting to the SURROUND speaker terminals:

Connect a pair of surround-positioned speakers to the “+” and “--” SURROUND terminals on the rear panel of DTX- 9909K following steps 1-5 on page 12

��������������������

Connecting to the SURROUND BACK speaker termi- nals:

Connect a pair of rear surround speakers to the “+” and “--” SURR BACK terminals on the rear panel of DTX-9909K fol- lowing steps 1-5 on page 12

��������������������

13