Getting Connected cont.
Connecting a DVD Player Video using the Compo- nent Video Input(s)
There are Component Video (Y, Pb/Cb, Pr/Cr) inputs on 3 of the
NOTE: When connectin g a player to the Component Video inputs , make sure that th e player’s audio outp uts are con- nected to the same input channel. i.e. If the player is con- nected to the Y, Pb/Cb, Pr/Cr inputs on the AUX2 channel, make sure that the player’s audio is connected to AUX2 audio inputs as well.
What you will need
•Player with Component Video outputs
•Set of component video cables
1.Connect one end of each of the component video cables to the Component Video (Y, Pb/Cb, Pr/Cr) outputs on the player
2.Connect the other ends of the component video cables to one of the Y, Pb/Cb, Pr/Cr Inputs on the
3.Select the proper input channel on the
NOTE: 3 of the A/V input channels have Com- ponent video inputs, DVD, AUX1 and AUX2, so make sure the correct one is selected.
Selecting the correct input channel:
Front panel: Press the INPUT button on the
Remote Control: Press the corresponding input button on the remote control to access the correct input channel. i.e. AUX1 for the AUX1 input channel, DVD/OPT1 for the DVD input channel, etc.
�������������������
Connecting to a TV / Video Monitor using the Com- ponent Video (Y, Pb/Cb, Pr/Cr) Outputs
What you will need
•TV/ video monitor with Component Video inputs
•Component video cable
1.Connect one end of each of the Component video cables to each of the Component Video Output jacks on the DTX- 9909K rear panel
2.Connect the other ends of the Component video cables to the Component Video inputs on the TV/Video monitor
3.Make sure the TV/Video monitor is set to the correct video input. Consult the TV/Video monitor’s user manual for the necessary instructions
��������������������
��������������������
18
