Karaoke Mode cont.
•MIC1 VOL (Microphone channel 1 volume)
Use this setting to set the maximum volume level for micro- phone channel 1. NOTE: If this is set too low, the micro- phone will not be loud enough.
Use the Input/Adjust knob on the front panel or the 
and 
buttons on the remote control to adjust the maximum volume for microphone channel 1
Volume Range: 0 -- 80
1.Turn the Input/Adjust knob on the front panel clock- wise or press the 
button on the remote control to raise the volume.
2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the 
button on the remote control to lower the volume.
•MIC2 VOL (Microphone channel 2 volume)
Use this setting to set the maximum volume level for micro- phone channel 2. NOTE: If this is set too low, the micro- phone will not be loud enough.
Use the Input/Adjust knob on the front panel or the 
and 
buttons on the remote control to adjust the maximum volume for microphone channel 2
Volume Range: 0 -- 80
1.Turn the Input/Adjust knob on the front panel clock- wise or press the 
button on the remote control to raise the volume.
2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the 
button on the remote control to lower the volume.
•MIC BASS (Microphone bass tone level)
Use this setting to adjust the amount of bass tone that is present in the microphone channels 1 and 2.
Use the Input/Adjust knob on the front panel or the 
and 
buttons on the remote control to adjust the microphone bass tone level
Bass Tone Range: -10dB -- +10dB
•MIC TREB (Microphone Treble tone level)
Use this setting to adjust the amount of treble that is pres- ent in the microphone channels 1 and 2.
Use the Input/Adjust knob on the front panel or the 
and 
buttons on the remote control to adjust the microphone treble level
Treble Tone Range: -10dB -- +10dB
1.Turn the Input/Adjust knob on the front panel clock- wise or press the 
button on the remote control to increase the treble.
2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the 
button on the remote control decrease the treble.
•MIC DELAY (Microphone Echo/Delay Effect)
Use this setting to set the delay time for the DSP micro- phone echo effect.
NOTE: The DSP effect volume must be set loud enough in order to hear the effect
Use the Input/Adjust knob on the front panel or the 
and 
buttons on the remote control to adjust the delay time
Delay Time Range: 0ms -- 250ms
1.Turn the Input/Adjust knob on the front panel clock- wise or press the 
button on the remote control to increase the delay time.
2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the 
button on the remote control decrease the delay time.
•REPEAT (Microphone Echo/Repeat Effect)
Use this setting to set the amount of repeat for the DSP microphone echo effect.
NOTE: The DSP effect volume must be set loud enough in order to hear the effect
Use the Input/Adjust knob on the front panel or the 
and 
buttons on the remote control to adjust repeat level
Repeat Range: 0dB
-- 80dB
1.Turn the Input/Adjust knob on the front panel clock- wise or press the 
button on the remote control to increase the bass.
2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the 
button on the remote control decrease the bass.
1.Turn the Input/Adjust knob on the front panel clock- wise or press the 
button on the remote control to increase the repeat level.
2.Turn the Input/Adjust knob on the front panel counter- clockwise or press the 
button on the remote control decrease the repeat level.
41
