The Installation Process

1Complete the “Pre-installation checklist” on page 27.

2Shut down your computer and unplug the power from your DSL or cable modem.

3Unplug the Ethernet cable that is connected from your DSL or cable modem to your computer and plug it into the WAN port on the SOHO unit. The SOHO unit is now connected directly to the modem.

4Plug the Ethernet cable supplied with your SOHO into any one of the four (numbered 1-4) Ethernet ports on the SOHO. Plug the other end into the Ethernet card installed in your computer. The SOHO unit will then be connected between your modem and computer.

5Restore the power to your DSL or cable modem. Wait until the indicator lights of the modem have stopped flashing indicating that the modem is ready.

User Guide 5.0

33

Page 33
Image 33
WatchGuard Technologies SOHO manual Installation Process