030-300331 Rev. A 62 October 2002
4-Port Router (Model 2400)
User Guide
The following screens show you how to add NAT services if you select enable from the Service Configuration
screen.
Westell has developed an extensive list of NAT services and you may select any service from this list. By selecting
your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on your Router
are open and that the required application traffic can pass through your LAN. For a list of supported services, please
go to section 9.8 (NAT Services).
From the selection provided, click on the service name of your choice. Next, click on enable in the Service
Configuration screen.
Click on OK in the Load new NAT Configuration? screen. This will load the new NAT Configuration and the
settings will automatically be saved.
NOTE: You can attach multiple NAT services to your profile. However, for each NAT service that you attach to
your profile, you must first select the new NAT service. Next, load the new NAT Configuration, as explained above.