Westell Technologies 2400 manual VC 1 Configuration, Vpi, Pcr

User Guide 4-Port Router (Model 2400)

	VC 1 Configuration
VPI	This setting allows you to change your VPI (Virtual Path Indicator) value for a
	particular VC, which is defined by your Service Provider.
VCI	This setting allows you to change your VCI (Virtual Channel Indicator) value for a
	particular VC, which is defined by your Service Provider.
PCR	Factory Default = 100%
	Peak Cell Rate (PCR)-The maximum rate at which cells can be transmitted across a
	virtual circuit, specified in cells per second and defined by the interval between the
	transmission of the last bit of one cell and the first bit of the next.
	This value is a percentage of the current data rate.
	100 allows this VC to use 100% of the available bandwidth.
	80 allows this VC to use 80% of the available bandwidth.
QoS	Quality of Service, which is determined by your Service Provider.
	CBR = Constant Bit Rate
	UBR = Unspecified Bit Rate
	VBR = Variable Bit Rate
Protocol	The Protocol for each VC, which is specified by your Service Provider.
	PPPoA = Point to Point Protocol over ATM (Asynchronous Transfer Mode)
	PPPoE = Point to Point Protocol over Ethernet
	Bridge = Bridge Protocol
	Classical IPoA = Internet Protocol over ATM (Asynchronous Transfer Mode). This
	is an ATM encapsulation of the IP protocol.
Status	The protocol status.
030-300331 Rev. A	45	October 2002