Westell Technologies 2400 manual Installation Requirements, Before you begin, Microfilters

User Guide 4-Port Router (Model 2400)

4.2 Installation Requirements

To install the Router, you will need the following:

•A Network Interface Card (NIC) installed in your PC or

•An available USB port

NOTE: Please wait until you have received notification from your service provider that your DSL line has been activated before installing the Router and software.

4.3 Before you begin:

Make sure that your kit contains the following items:

•Westell 4-Port Router (Model 2400)

•Power Supply

•RJ-45 Ethernet cable

•USB cable

•RJ-11 Phone cable

•Westell CD-ROM containing USB software drivers and User Guide in PDF format

•Quick Start Guide

Microfilters

ADSL signals must be blocked from reaching each telephone, answering machine, fax machine, computer modem or any similar conventional device. Failure to do so may degrade telephone voice quality and ADSL performance. Install a microfilter if you desire to use the DSL-equipped line jack for telephone, answering machine, fax machine or other telephone device connections. Microfilter installation requires no tools or telephone rewiring. Just unplug the telephone device from the baseboard or wall mount and snap in a microfilter, next snap in the telephone device. If your kit did not include microfilters, please contact your ISP or Westell to obtain a microfilter kit, which contains multiple microfilters for your installation.

030-300331 Rev. A 5 October 2002