Westell Technologies 2400 manual Advanced Service Configuration

User Guide 4-Port Router (Model 2400)

9.4Advanced Service Configuration

To setup additional Service Configuration options go to Configuration at the homepage menu and select Service Configuration. Click on Advanced Configuration at the Service Configuration screen.

When you click on Advanced Configuration, a Wizard will appear. The Wizard will guide you through the steps of creating an advanced NAT service entry. You can setup port forwarding and trigger port options as well as enable Static NAT through the advanced configuration wizard.

NOTE: Westell strongly recommends that you do not change any values in this section. If you experience any problems, please re-set your Router via the external hardware re-set switch or the procedure defined under the Maintenance menu.

Well Known Service	This option allows you to Configure Port Forwarding parameters based on
	well-known services.
Custom Service	This option allows you to customize your Port Forwarding based on your
	specific port requirements.
Static NAT	This option allows you to set up a Static NAT IP Address.

030-300331 Rev. A 68 October 2002