Westell Technologies 2400 manual Service Configuration

User Guide 4-Port Router (Model 2400)

Service Configuration

The following settings will be displayed if you select Service Configuration from the Configuration menu.

Westell has developed an extensive list of NAT services and you may select any service from this list. By selecting your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on your Router are open and that the required application traffic can pass through your LAN. For a list of supported services, please go to section 9.8 (NAT Services).

Current Profile	Displays the NAT (Network Address Translation) services that you have
	selected.
Service Name	Drop down selection menu of NAT (Network Address Translation) service you
	can select to configure you Router.

If you select new from the Service Configuration screen, the Create new NAT Profile? pop-up screen will be displayed. Click on OK to begin creating your new NAT profile. Click Cancel if you do not want to create a new NAT profile.

This screen below shows that you have chosen to create a new NAT profile. After you create the new NAT profile, click on enable. You may create up to four NAT profiles and attach an unlimited number of services to each profile.

030-300331 Rev. A 59 October 2002