Whirlpool 9753051 Bake/Roast Cont, Adjusting Oven Temperature Control, Using Your Range, You See

Models: 9753051

1 76
Download 76 pages 25.29 Kb
Page 15
Image 15
BAKE/ROAST (CONT.)

USING YOUR RANGE

BAKE/ROAST (CONT.)

7. After cooking, turn off the oven.

PRESS

YOU SEE

 

OFF

(time of day)

ADJUSTING OVEN TEMPERATURE CONTROL

Although your new oven is properly adjusted to provide accurate temperatures, it may cook faster or slower than your old oven.

If, after using the oven for a period of time, you are not satisfied with the baking/roasting results, you can change the offset temperature by following the steps below. The control will “remember” the selected offset even after the power has been inter- rupted or lost.

NOTE: DO NOT measure the oven temperature with a thermometer. Opening the oven door will lower the oven temperature and give you an incorrect reading. Also, the thermometer temperature will change as your oven cycles.

1.Press and hold BAKE for 5 seconds.

The display will show the current offset temperature, for example, “0” if you have not already adjusted the temperature.

PRESS

YOU SEE

BAKE

 

F

 

HEAT

BAKE

TIMER STOP

DELAY

LOCKED CLEAN

TIMED

BROIL START?

COOK TIME

(factory setting of “0”)

2. Set the new offset temperature.

PRESS

Press to raise the temperature or to lower

 

the temperature in 10°F/5°C amounts. You can

 

set the temperature change as low as -30°F/15°C

 

or as high as +30°F/15°C. A minus (-) sign will

TEMP

appear before the number when decreasing the

 

temperature setting. The minus sign indicates

 

that the oven will be cooler by the displayed

 

amount. There is no sign in front of the number

 

when increasing the temperature setting.

 

YOU SEE

 

 

F

HEAT

BAKE

TIMER STOP

DELAY

LOCKED CLEAN

TIMED

BROIL

COOK TIME

(example when making oven 10°F [6°C] cooler)

3. Enter the adjustment.

PRESS

NOTE: You must press the START button or your

START

 

changes will not be made.

 

YOU SEE

(time of day)

To display temperatures in °C instead of °F…

Press and hold the BROIL button for 5 seconds. You will hear a short tone and the temperature display will switch to °C. To switch back to °F, repeat the instructions above. Whenever you switch, “°C” or “°F” will be displayed for 5 seconds.

PRESS & HOLD

BROIL

15

Page 15
Image 15
Whirlpool 9753051 manual Bake/Roast Cont, Adjusting Oven Temperature Control, Using Your Range, You See, Press & Hold