Whirlpool 9753051 Removing The Oven Door, Removable Control Console Glass, Removing the oven door

Models: 9753051

1 76
Download 76 pages 25.29 Kb
Page 31
Image 31
REMOVING THE OVEN DOOR

CARING FOR YOUR RANGE

CARING FOR YOUR COOKTOP

5. Test the flame by turning the control from “LO” to

Low flame

“HI,” checking the flame at each setting.

 

Port

High flame

Port

REMOVING THE OVEN DOOR

Removing the oven door:

1.Open the door to the Broil Stop position (open about 4" [10 cm]).

2.Lift door slightly and pull out and back until hinges come out to the catch position.

3.Push door down and pull straight out to remove door completely.

4" (10 cm)

Replacing the oven door:

1.Holding the door by the handle, place the top of the door under the cooktop overhang and use your leg to apply pressure to slide hinges into the slots as far as possible.

2.Open door to the broil position or slightly past it.

3.Using the side of your leg, apply pressure to the bottom of the door front. Lift the door slightly while applying pressure to push, until the hinges have gone in fully.

REMOVABLE CONTROL CONSOLE GLASS

The control console glass can be removed to allow

To remove the control console glass:

easy cleaning of both sides of the glass and the

1.

Remove surface element control knobs by

control panel.

 

pulling them straight out.

Use a sponge with warm, soapy water. Do not

2.

Release console clips and remove the control

clean the electronics behind the glass. Liquids can

 

console glass by pulling it slightly up and

 

 

damage the electronics.

forward.

 

31

Page 31
Image 31
Whirlpool 9753051 Removing The Oven Door, Removable Control Console Glass, Removing the oven door, Replacing the oven door