Whirlpool 9753051 manual Setting The Controls, Using The Self-Cleaning Cycle, Press, You See

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS

To start cleaning immediately:

1.Press the CLEAN button.

A 31⁄2-hour Self-Cleaning cycle will be set. (The first 3 hours are for cleaning, the last 30 minutes are for cooling.)

PRESS YOU SEE

CLEAN

CLEAN TIME

2.Setting the cleaning time (optional).

If you want a Self-Cleaning cycle longer or shorter than 31⁄2 hours, use the hour and minute buttons to set the cleaning time you want. Press the up or down button(s) to set a time between 21⁄2-41⁄2hours on the display.

PRESS YOU SEE

HR MIN

CLEAN

TIME

(example for 4 hours,

30 minutes cleaning time)

3. Start oven.	PRESS	YOU SEE
NOTE: The door will lock right after you press	START
START.		HEAT
		TIMED

ON

LOCKED CLEAN TIME

4. When the Self-Cleaning cycle ends...	YOU SEE
“LOCKED” goes off and the door unlocks.

CLEAN

To delay cleaning start time:

1.Press the CLEAN button.

A 31⁄2-hour Self-Cleaning cycle will be set. (The first 3 hours are for cleaning, the last 30 minutes are for cooling.)

PRESS YOU SEE

CLEAN

CLEAN TIME

2.Setting the cleaning time (optional).

If you want a Self-Cleaning cycle longer or shorter than 31⁄2 hours, use the hour and minute buttons to set the cleaning time you want. Press the up or down button(s) to set a time between 21⁄2-41⁄2hours on the display.

PRESS		YOU SEE
HR	MIN	CLEAN
		TIME
		(example for 4 hours,
		30 minutes cleaning time)

25