Worth Data 701 RF manual Beep Tone, Batteries, Date Format

•Scan up to seven 4-digit pairings where the first 2 digits represent the hex number to replace and the second 2 digits represent the hex number to insert. You can have up to seven character reassignments.

•Scan SET

You can eliminate the output of a character by using FF as the hex number to insert. For example, if you wanted to eliminate all $, following the above instructions, enter 24FF.

Beep Tone

Speaker

Lowest	0
Low	1
Medium	2
High	3
Highest	4
No Beep Tone	5

Batteries

Alkaline Batteries	0
Rechargeables	1

•In order to get an accurate Battery Status reading; you must select the correct battery type. If you ordered NiMH batteries (part number L01) with the RF Terminal, this will be set to Rechargeable before shipping.

•If you didn't order re-chargeable batteries, this shipped setting is Alkaline. Battery Status can be displayed by pressing the STATUS key on the RF Terminal keypad.

•Before you can recharge the batteries, this parameter must be set to Rechargeables. Don't try to recharge alkaline batteries. They might explode. This will void your warranty.

•If you decide to use rechargeables after ordering the RF Terminal without rechargeables included, you must change this setting allow recharging.

Date Format

Date/ Time

US Format	0
European Format	1

•The US format of mm/dd/yy is the default setting.

•If you switch formats, you must reset the date (SET DATE) in the new format also.

2-18