Worth Data 701 RF Methods TCP/IP COM, Blank or a valid file name, Prompt, shifted, timestamped

ServerOn
Valid values:	True, False
Function:	Set to True to enable the server. Set to false to turn
	the server off. You should leave this off unless your
	program is actually running. Setting it to True at
	design-time can cause problems.
Quiet
Valid values:	True, False
Function:	If Quiet is set to True then any status and error
	message generated by WDIPterm will be
	suppressed.
LogFile
Valid values:	blank or a valid file name
Function:	If the file does not exist it will be created. If it
	exists, it will be appended to. If LogFile is blank,
	no log file is maintained.
ClientList
Valid Values: Read Only.
Function:	Returns a formatted string listing all attached client
	BaseNames and associated IP numbers. Format is

"basename CR/LF ip address CR/LF basename…".

Methods - TCP/IP COM

Methods are commands that you issue to the WDIPterm control. All of the "Inputxxx" commands cause the terminal to wait for operator input.

Note that your development environment may show more available methods for the WDIPterm control than are listed here. This is normal. You may

ignore methods you see that are not listed here.

InputAny
Parameters:	basename, channel, terminal, line, position,
	prompt, shifted, timestamped
Function:	This instructs the terminal attached to client
	basename on channel to display the prompt at line
	and position and wait for data to be entered from
	either terminal keypad or scanner. If shifted is set to
	"true", the terminal will start in shifted mode.
	Timestamped appends a (hhmmss) prefix to the
	returned data.

6-26