InputKeyBd

 

Parameters:

line, position, prompt, shifted, timestamped

Function:

This instructs the ActiveTerminal to display the

 

prompt at line and position and wait for data to be

 

entered from the terminal keypad only. If shifted is

 

set to “true”, the terminal will start in shifted mode.

 

Timestamped appends a (hhmmss) prefix to the

 

returned data.

InputScanner

 

Parameters:

line, position, prompt, allowbreakout, timestamped

Function:

This instructs the ActiveTerminal to display the

 

prompt at line and position and wait for data to be

 

entered from the terminal scanner only. Setting

 

allowbreakout to true allow user to "break out" of

 

scanner only mode by pressing the end key on the

 

terminal. A termID+CR will be sent to the host.

InputYesNo

 

Parameters:

line, position, prompt

Function:

This instructs the ActiveTerminal to display the

 

prompt at line and position and wait for a Yes

 

(Enter key or C key) or a No (0 key or B key) from

 

the terminal keypad.

 

Note: C and B keys are used to facilitate keypad

 

entry while scanning with the integrated laser.

InputPassword

 

Parameters:

line, position, prompt, shifted

Function:

This instructs the ActiveTerminal to display the

 

prompt at line and position and wait for data to be

 

entered from the terminal keypad only. The entered

 

data is not displayed on the terminal.

InputSerial

 

Parameters:

line, position, prompt

Function:

This instructs the ActiveTerminal to display the

 

prompt at line and position and wait for data to be

 

received through the terminal serial port. Waiting

 

for serial input can be bypassed by pressing the

 

enter key on the terminal which will send an empty

 

data string to the host (fires the OnTermData event

 

handler).

6-18

Page 72 Page 74
Page 73
Image 73
Worth Data 701 RF manual Entry while scanning with the integrated laser, Line, position, prompt, shifted
Page 72 Page 74
Top Page Image Contents