Worth Data 701 RF manual Reset, Baud Rate, Parity, Data Bits, Stop Bits, Protocol

Reset

While in Setup Mode, DO NOT scan the RESET bar code unless you want to

set all of the RF Terminal setup parameters back to the factory default settings. Scanning RESET will erase all changes you have made.

The following serial parameters Baud Rate, Parity, Data Bits, and Stop Bits apply only to firmware updates and a portable printer such as the Cameo and QL3 printers.

Baud Rate	RS232
300	0
600	1
1200	2
2400	3
4800	4
9600	5
19,200	6
Parity	RS232
None	0
Even	1
Odd	2

•None is generally used with 8 data bits

•Even or Odd parity is generally used with 7 data bits.

Data Bits	RS232
7 bits	0
8 bits	1
Stop Bits	RS232
1 bit	0
2 bits	1
Protocol	RS232
None	0
XON/XOFF	1
Maintain backward compatibility for illegal statement handling	E
Illegal statement handling for current versions	F

•Settings 0 and 1 pertain to use of a serial Printer with your RF Terminal. Use setting 1 for XON / XOFF if your serial Printer supports it. It DOES NOT apply to the Cameo and QL3 Printers.

2-21