Worth Data 701 RF manual Base and Relay Setup, Using the RF 700 Configuration Utility

•Settings E and F pertain to the way the RF Terminal handles illegal

statements coming from the host computer. RF Terminal software versions prior to 9.059 did not handle illegal statements the same way as current versions. This setting is really only applicable if you had written your host program to be compatible with RF Terminal versions prior to RFT9059.

Base and Relay Setup

The Base and Relay Setup is only accessible via the RF 700 Configuration Utility included on the Utilities CD that came with your RF Terminal. You can also download the utility from our website at:

http://www.barcodehq.com/utilities/rfserial.exe

Using the RF 700 Configuration Utility

After you install the Configuration Utility from the CD or from the web, make sure your Base or Relay Station is attached to one of the computer COM ports using the 9 pin serial cable (F36) included with your system and that the power supply (5v from Worth Data ONLY) is plugged in. A Base Station will light the LED Green, while a Base jumpered as a Relay will light a the LED Yellow, so be sure your unit is jumpered properly.

Start the RF 700 Configuration Utility.

If you know which COM port you are attached to, select that port in the program, then click "Continue". If you are unsure of the COM port number, the program can find it for you. Enter the range of COM ports to search, then click "Find Base Station".

2-22