Xerox 490/980 Color Continuous Feed Printing System | CMS Option Tool |
Selecting a layout file
Each layout file is dependent upon the desired measuring purpose. The layout file chosen will appear on the printed colorimetric pattern. The following table displays the measuring purpose and the name of the layout file that should be chosen:
Color Conversion Layout Files
ICCOLOR: iCColor.rnd.xml
Calibration
iCColor_up_Calib.rnd_1.xml
iCColor_up_Calib.rnd_2.xml
iCColor_up_Calib.rnd_3.xml
iCColor_dn_Calib.rnd_1.xml
iCColor_dn_Calib.rnd_2.xml
iCColor_dn_Calib.rnd_3.xml
DTP70: DTP70.rnd.xml (all three prints are in one file)
Calibration
DTP70_up_Calib.rnd_1.xml
DTP70_up_Calib.rnd_2.xml
DTP70_up_Calib.rnd_3.xml
DTP70_dn_Calib.rnd_1.xml
DTP70_dn_Calib.rnd_2.xml
DTP70_dn_Calib.rnd_3.xml
Eye-One iSis: EyeOneiSis.rnd.xml
Calibration
EyeOneiSis_up_Calib.rnd_1.xml
EyeOneiSis_up_Calib.rnd_2.xml
EyeOneiSis_up_Calib.rnd_3.xml
EyeOneiSis_dn_Calib.rnd_1.xml
EyeOneiSis_dn_Calib.rnd_2.xml
EyeOneiSis_dn_Calib.rnd_3.xml
Color Management Guide |
