Pre-Calibration Engine Density Adjustment | Xerox 490/980 Color Continuous Feed Printing System |
Create an Empty Color Resource
In order to perform the pre-calibration engine density adjustment, a Color Resource must be created with no calibration data associated with it. This is because we want to simulate native engine performance. Follow these steps to create an Empty Color Resource. There is a separate procedure for Simplex Systems and for Duplex Systems.
For Simplex Systems
1.Ensure that the Xerox 490/980 Color Continuous Feed Printing System is powered on and is connected to the PC-UI.
2.On the left-side navigation pane of the Xerox 490/980 Color Continuous Feed Printing System PC-UI, select [CMS Option Tool].
3.Select the [Paper Information] tab.
Note
Ensure that [Downloading with Calibration] is not selected.
4.Under the Paper Name field, select [Plain Paper] for PRINTER1.
5.Select [Properties].
4-2 | Color Management Guide |
