Xerox 490 manual Color Calibration Process for v1.1.6 Software

Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System

23.Select the [Color] tab.

24.In the Color Characteristics (Upstream) box, in the Printer Name drop-down menu select [PRINTER1], then select [Setting].

25.In the Resource Group Name drop-down menu, select [TRC_PRINTER1.cntl].

26.For both RGB and CMYK under the Simulation drop-down menus, ensure [Device] is selected.

27.Select [OK].

28.Select the [PDF] tab.

29.In the Page Size drop-down menu, select [Non-standard].

Note

In the following step, while using Inches is recommended, it is not required. Millimeters are also supported by this documentation.

30.For Unit, select [Inch].

31.In the Width field type [5.6] (142 mm). In the Length field type [12.00] (305 mm).

32.In the Copies field, type [5] and select [OK].

5-4 Color Management Guide