Color Calibration Using ColorPort Utility Software

Xerox 490/980 CCF Printing System

Color Calibration

Before performing color calibration, set the cutter to A3 and ensure that all color settings for both printers are set at 4 (C,M,Y,K).

1.Select the CMS Option Tool icon from the PC-GUI.

2.Select the [Print Colorimetric Pattern] tab.

3.Select the colorimetric pattern to print from the pull-down menu. For Calibration, select (Eye-One iSis).

4.Select [Print].

5.Select [Yes] to continue. After printing is complete, select one sample of the following test patterns and cut around the dotted lines neatly:

Test Pattern Names

For Upstream Halftone Dot

EyeOneiSis_up_Calib.rnd_1 (299)

EyeOneiSis_up_Calib.rnd_2 (299)

EyeOneiSis_up_Calib.rnd_3 (299)

For Downstream Halftone Dot

EyeOneiSis_dn_Calib.rnd_1 (299)

EyeOneiSis_dn_Calib.rnd_2 (299)

EyeOneiSis_dn_Calib.rnd_3 (299)

For Upstream Error Diffusion

EyeOneiSis_up_Calib.rnd_1 (299)

EyeOneiSis_up_Calib.rnd_2 (299)

EyeOneiSis_up_Calib.rnd_3 (299)

For Downstream Error Diffusion

EyeOneiSis_dn_Calib.rnd_1 (299)

EyeOneiSis_dn_Calib.rnd_2 (299)

EyeOneiSis_dn_Calib.rnd_3 (299)

6-2

Color Management Guide

Page 92
Image 92
Xerox 490 manual Color Calibration, Test Pattern Names