Print Using LPR
The purpose of this appendix is to help you submit the various test patterns necessary to perform the pre-calibration and color calibration procedures found in this guide to the printer.
The following procedure uses LPR (Line Printer Remote) to submit a job to the printer.
1.Select [Start] and [Run].
2.Type [cmd] and select [OK].
3.A command-prompt window will appear. Type the following exactly as shown, substituting the IP Address of the printer for [printer IP address], the and any underscores for spaces; do not type the underscores unless it is actually part of the queue name: [lpr_-S_[printer IP address]_-P_[queue name]_ ].
4.Ensure that the command-prompt window is small enough so that you can see the Windows Explorer window behind it that has the [Color Calibration Resources] directory open.
5.Select the appropriate test pattern to be printed and hold down the left mouse button.
Printer Operator Guide | B-1 |
