Xerox manual Xerox 490/980 Color Continuous Feed Printing System

Xerox 490/980 Color Continuous Feed Printing System Pre-Calibration Engine Density Adjustment

Decimal points are not allowed in a Queue Name, so substitute in a dash [ - ] if the paper stock width is in a half-inch increment.

3.In the Queue Name field, type [TRC_ [Paper Stock Width]].

4.Under the Data Format drop-down menu, select [PDF].

5.In the Delete Job After Printing box, select the [Manual] radio button.

6.For Input Process Mode, select the [Spool] and [Do Not Hold Job] radio buttons.

7.For Output Process Mode, select the [Spool] and [Do Not Hold Job] radio buttons.

8.For Extended Spool, select the [Enable] radio button.

9.Select the [Paper Setting] tab.

10.Ensure that [SYSTEM_DEFAULT] is the selected stock set name.

11.In the Paper Identifier drop-down menu, select the imposition file [Duplex_PreCal_[Paper Stock Width]].

Color Management Guide 4-15