Xerox manual Xerox 490/980 Color Continuous Feed Printing System

Xerox 490/980 Color Continuous Feed Printing System Pre-Calibration Engine Density Adjustment

6.For the Paper Name field, type [TRC].

7.Select [Save As].

8.After the pop-up window appears, select [Yes].

9.Under the Paper Name field, select [Plain Paper] for PRINTER2 and repeat steps 4-8 of this procedure.

10.Holding <CRTL> on the keyboard, select the Paper Name [TRC] for both PRINTER1 and PRINTER2.

11.Select [Download].

12.After the pop-up window appears, select [Yes].

13.The message “Resource file Download process (Ended).” will appear at the lower part of the window above the status bar.

14.Exit the CMS Option Tool by selecting [Close] located at the bottom right of the window.

Color Management Guide 4-5