Xerox 490 manual Pre-Calibration Engine Density Adjustment

Pre-Calibration Engine Density Adjustment Xerox 490/980 Color Continuous Feed Printing System

Note

For the next step, the Queue Name should follow the convention of [TRC_ ] and the number in inches or millimeters of the paper stock width (i.e., [TRC_19-5in], [TRC_495mm]). Decimal points are not allowed in a Queue Name, so substitute in a dash [ - ] if the paper stock width is not a whole number.

3.In the Queue Name field, type [TRC_ [Paper Stock Width]].

4.Under the Data Format drop-down menu, select [PDF].

5.In the Delete Job After Printing box, select the [Manual] radio button.

6.For Input Process Mode, select the [Spool] and [Do Not Hold Job] radio buttons.

7.For Output Process Mode, select the [Spool] and [Do Not Hold Job] radio buttons.

8.For Extended Spool, select the [Enable] radio button.

9.Select the [Paper Setting] tab.

10.Ensure that [SYSTEM_DEFAULT] is the selected stock set name.

11.In the Paper Identifier drop-down menu, select the imposition file [Simplex_PreCal_[Paper Stock Width]].

4-10 Color Management Guide