Xerox 490 manual Use ColorPort to Measure Targets, Select the Measure Target tab

Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System

Use ColorPort to Measure Targets

This is to measure the printed test grids using the ColorPort Utility Software.

1.Open the ColorPort Utility Software (v1.5.4).

2.Select the [Measure Target tab].

3.Under the Target drop-down menu, select [ATCN_iSis].

4.Under the Measurement Device drop-down menu, select [X-RiteEye-One iSis].

5.Select [Connect] and wait for the Eye-One iSis to be ready.

5-12 Color Management Guide