CMS Option Tool | Xerox 490/980 Color Continuous Feed Printing System |
Create Calibration Data
Use the Create Calibration Data tab to create a table to be used for calibration. This table is generated based on measured colorimetric data. Select [Resource Set at Destination] to send color resources to the printer.
How to Create Calibration Data
1.Select the CMS Option Tool icon from the
2.Select the [Create Calibration Data] tab.
3.Select the Paper Name from the
4.Select the desired data file for the printer(s). When selecting the data file for Halftone Dot, the file will be *.ht. When selecting the data file for Error Diffusion, the file will be *.ed. Select the first file for each.
5.Select the Resource and set at destination or leave as System Default.
6.Select [Execute].
For a detailed description of options on these selections, refer to the information in the following section.
Select the paper type
All standard and registered types of paper will be listed. Select a paper type from this option. Plain paper and Special paper are considered standard. All other paper types must be registered through the Custom Paper option.
Color Management Guide |
