Xerox manual Xerox 490/980 Color Continuous Feed Printing System

Xerox 490/980 Color Continuous Feed Printing System Color Calibration Process for v1.1.6 Software

Note

Each test pattern takes about two minutes for the Eye-One iSis to process.

6.Insert a test pattern into the Eye-One iSis with the solid black bar facing upwards.

7.After the color data has been successfully processed, remove the test pattern from the Eye- One iSis and press [OK] at the pop-up window.

8.Select [Save Data].

9.Under the Format drop-down menu, select [CGATS].

10.Select [Save].

Note

If a duplex system exists, the first file scanned from each engine should be denoted with an _1.txt at the end of the filename. The second file with a _2.txt, etc.

11.For the filename, type in an appropriate name (i.e. Upstream_1.txt).

12.Select [Save] and choose the [My Documents] folder.

13.Select [Clear Data] and select [OK] at the pop-up window.

14.Do one of the following based on whether a simplex or duplex configuration exists:

a.For a simplex configuration: Repeat steps 6-13 for the remaining two test patterns and proceed to step 15.

b.Repeat steps 6-13 for the remaining two test patterns of the upstream printer, and three test patterns of the downstream printer, then proceed to step 15.

15.At the pop-up window, select [Close].

16. Exit the ColorPort Utility Software.

Color Management Guide 5-13