P R I N T E R M A I N T E N A N C E |
What To Look For
There are basically three things to look for in examining the test print.
1.The Color Density and the Black Density are a matter of taste. The 30% halftones can be used to judge the current level and decide on a preference.
2.The Color Density and Black Density should be at approximately the same level. This is important in order to make the Color Balance adjustment.
3.The correct Color Balance is determined by comparing the circle in the center of the Color Balance object marked “CURRENT” with the gray background. The background is produced using black only and the circles are produced using a combination of cyan, magenta, and yellow. The objective is for the “CURRENT” circle to be the closest gray when compared to the background of any of the circles in the object, i.e., the most neutral.
