Xerox C55/C55mp manual How to Load the Tray With Transparencies

P R I N T M E D I A 3-7

How to Load the Tray With Transparencies

Load transparencies in the same way that you load paper. (See “How to Load the Tray With Paper,” on page 3–3.) Use recommended transparencies for optimum performance. Do not fill the tray with more than 75 sheets.

NOTE: Your C55 printer automatically detects transparencies at the time of printing and adjusts the print settings to optimize transparency quality.

TRANSPARENCY TRAY

If your printer has two trays, you can designate one of the trays as the transparency tray. The printer will automatically feed from the designated transparency tray if the media is selected as “Transparency” in the driver.

You can designate a tray as the “Transparency Tray” through either the printer’s Control Panel or the CentreWare DP software. See page 4–16 in Chapter 4: The Control Panel for more information about how to designate a tray as a Transparency Tray by using the Control Panel. To designate a tray by using CentreWare DP, refer to the Technical Information Guide.