Assigning the IP address manually

Follow the procedure below to register the network information manually.

Note

Before setting the network information, check that this unit is connected properly to the network. If the disconnected icon (page 10) is displayed on the top right of the display, check the LAN cable connection and the condition of the network to which the LAN cable is connected.

y

The factory settings of the network information are as follows.

IP address: 192.168.100.200

Subnet mask: 255.255.255.0

Default gateway: 0.0.0.0

Numeric keys

 

 

 

LAN

1

2

3

 

4

5

6

OUT

AUDIO

7

8

9

 

 

 

 

IN

 

0

 

 

 

MIC MUTE

VOL

IN 12V

 

 

 

DC

/ /

1 Press repeatedly until the initial display appears.

“???.???.???.???” is displayed when the DHCP server does not exist in the network, and the IP address obtained from the DHCP server is displayed when it exists.

IP: ???.???.???.???

Menu :Address

Preparation Procedure

2 Press .

The menu screen appears.

Menu

1. Settings

2.Call History

3.Online

3 Press or

to select “1. Settings”, and

then press

.

The “Settings” menu appears.

Settings

1. Network Settings

2.Sound Settings

3.General Settings

4 Press or to select “1. Network Settings”,

and then press .

The “Network Settings” menu appears.

Network Settings

1. IP Address

2.Subnet Mask

3.Default Gateway

PREPARATION

English

11

Page 15
Image 15
Yamaha PJP-100H IP ???.???.???.??? Menu Address, Menu Settings Call History Online, Assigning the IP address manually