Yamaha PJP-100H Configuring Settings

CONFIGURING SETTINGS

24

You can configure the settings of this unit using the operation keys on this unit or the web browser (web menu) on the PC

connected to this unit.

• Some settings such as registering the names of this unit or the SIP server are available only with the web menu.

• See “Setting Menu List” (page 26) for details on the setting menu configuration and parameters of each menu item.

Follow the procedure below to configure settings using the

operation keys on this unit.

1Press in the initial display.

The menu screen appears.

2Press or to select “1. Settings”, and

then press .

The “Settings” menu appears.

3Press or to select the menu category,

and then press .

The menu items in the selected category appear. The

following figure shows an example in which “1.

Network Settings” is selected. For details on the

setting menu configuration, see “Setting Menu List”

(page 26).

Configuring Settings

Notes

Configuring settings using the keys

on this unit

123

456

789

0

MIC MUTE

LAN

VOL

DC IN 12V IN AUDIO OUT

Menu :Address

IP: 192.168.0.12

3. Online

2. Call History

1. Settings

Menu

3. General Settings

2. Sound Settings

1. Network Settings

Settings

3. Default Gateway

2. Subnet Mask

1. IP Address

Network Settings

01EN_00_PJP-100H_UCGB.book Page 24 Wednesday, August 23, 2006 3:04 PM

Contents

Main OWNERS MANUAL MODE DEMPLOI BEDIENUNGSANLEITUNG IP audio conference system i IMPORTANT SAFTY INSTRACTIONS ii English FCC INFORMATION (for US customers) iii For U.K. customers CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. Note PREPARATIONINTRODUCTION BASIC CALL ADDITIONAL INFORMATION Contents BASIC CALL OPERATIONS INTRODUCTION PREPARATION CONFIGURATIONS Audio conference through networks Features About this manual Supplied Accessories About trademarks Top panel Controls and Functions Right side panel 42 31 Other Display 2006.05.15 09:48:20 1 02 83 4 9567 IP: 192.168.100.200 To configure the settings from a PC To use this unit with a SIP server Preparation Procedure 9 1 2 3 4 Step 1: Connecting this unit 4 3 1 2 Obtaining the IP address automatically IP: 192.168.0.12 To check if the correct network information is obtained If the IP address display is ???.???.???.??? IP: ???.???.???.??? Step 2: Registering the network settings of this unit Page Page Page About installation environment Take the positions of the talkers in consideration Step 3: Installing this unit in the conference room Making a Call 16 4 5 To mute the microphone 192.168.100.20 Page Page Page 20 1 2 3 Answering a Call IP: 192.168.0.10 192.168.100.10 To call another location during a call To answer a call during a call Talking with Multiple Locations When Speaker Mode is set to Divide When Speaker Mode is other than Divide Display and speaker output during multiple connections 192.168.100.20 192.168.100.30 192.168.100.40 [1] 192.168.100.20 [2] 192.168.100.30 [3] 192.168.100.40 Page Configuring Settings 25 4 5 To return to the previous menu without saving the setting (192.168.100.200) [ ] [#] 192.168.100.200 IP Adress Configuring settings using the web menu Managing the address book Setting Menu List Managing address book Configuring network settings Configuring the DHCP server settings Configuring the connection mode Configuring the NAT traversal setting Configuring the SIP server setting Registering the unit name Configuring sound settings Using the web menu Configuring the speaker mode 30 Configuring the room size Configuring the external input/output setting 1 2 3 Configuring general settings Downloading the call history of this unit Setting password for the web menu Restoring the factory settings of this unit Storing the call history Setting the password Restoring the factory settings Editing Address Book Registering a new address Editing an existing address Deleting an address 35 1 2 3 4 Using the SIP Server Registering the SIP server Notes on SIP server operation Page Setting Date and Time 38 1 2 3 Managing the Call History Confirming the System Log Message of This Unit (syslog) The maximum number of locations by the cascade connection Hierarchical Connection of Multiple PJP Units (Cascade Connection) What is cascade connection ? 41 Step 1. Configure the setting of the cascade server. 1 192.168.100.20 192.168.100.30 Updating the Firmware Software Licensing Agreement 43 1 3. General Settings 2 Settings 1. Network Settings 2. Sound Settings 3. General Settings 4. Restore Settings 5. Firmware Update 4 5 Updating the firmware manually 45 2 3 4 5 Troubleshooting Q1: LED indicators do not light up Q2: Web menu setting is not available Q3: Call is impossible Q4: Other problems Resetting the Unit Page Obtaining the Setting Information for Support on this Unit Obtaining the setting information Obtaining the audio characteristic ADDITIONAL General Operating environment Specifications Notes for Transfer/Disposal of This Unit OWNERS MANUAL MODE DEMPLOI BEDIENUNGSANLEITUNG IP audio conference system