Answering a Call
Follow the procedure below to answer a call from another unit.
1While having an incoming call, press 
.
When there is an incoming call, the back light of the display lights up and the ringing tone is generated. The display shows the IP address of the unit calling this unit.
IP: 192.168.0.10 192.168.100.10
Menu 
:Address
y
If the call is made by the PJP unit which is already registered in the address book, the name registered for the unit is displayed instead of the IP address.
■To mute the microphone
When you want to talk about a topic that you do not want to be heard by the other unit(s) involved in the call, press MIC MUTE. The microphones of this unit are turned off while the MIC MUTE LED lights up. To cancel muting, press MIC MUTE again so that the MIC MUTE LED turns off.
y
The microphone indicators (blue LEDs) do not light up while the microphones are muted.
■To deny the call
While having an incoming call, press 
.
Note
Do not disconnect the LAN cable or power cable during a call. Doing so may cause malfunction.
2To adjust the speaker volume, press VOL
3To disconnect the call when the conference
is complete, press 
.
20
