Setting Date and Time
The SNTP server (time distribution server) enables to adjust the date and time information in this unit automatically at constant intervals.
Notes
•The date and time of this unit cannot be adjusted without a SNTP server. In this case, note that the downloaded call history (page 38) does not show correct date and time data.
•If the time data cannot be obtained from the SNTP server at the moment this unit is turned on or the designated SNTP server does not exist at the moment, the time is not displayed on this unit.
•The synchronization with the SNTP server may not be available depending on the security settings of the LAN accommodating this unit. To use an external SNTP server in this case, it is required to change the settings of the router, etc. Refer to the instruction manuals for your router for details.
1In the web menu, click “SNTP Server”.
The “SNTP Server” window appears.
2In the “SNTP Server ID” field, enter the name or IP address of the SNTP server to be used.
3In the “SNTP Synchronization Interval” field, select the desired interval for synchronization with the SNTP server.
4Click “Submit”.
The setting is registered and the top of the web menu reappears.
CONFIGURATIONS
English
37
