Yamaha PJP-100H Using the SIP Server

35

CONFIGURATIONS

English

When this unit is used in an environment with a SIP

server, the address of the SIP server to be referenced by

this unit and the SIP address of this unit should be

registered. If password authentication is required for

accessing the desired SIP server, it is also necessary to

enter the password. Consult your system administrator for

details.

The settings described in this section are not required if this unit

is used in an environment without SIP server.

1In the web menu, click “SIP Server”.

The “SIP Server” window appears.

2In the “SIP Server” field, click “Enable”.

3In the “SIP Server Name” field, enter the

name or IP address of the SIP server.

4If password authentication is required for

accessing the desired SIP server, enter the

authentication password for the SIP server in

the “SIP URI Password” field.

5In the “SIP URI” field, enter the SIP address

to be set to this unit.

Enter the SIP address in the format

“sip:(sip address)”.

Example: sip:sipuser@yamaha.co.jp

6Click “Submit”.

The setting is registered and the top window of the

web menu reappears.

• To connect a call using the SIP server, the SIP address

of this unit should be registered in the SIP server.

• It is not possible to establish a connection between a

PJP unit that uses the SIP address and a PJP unit that

uses the IP address.

• If the SIP server is installed outside the LAN, it is

required to use the NAT transversal function (page27)

of this unit.

In this case, the following conditions are required.

• The router to which the PJP is connected supports the

UPnP function.

• A global IP address is assigned to the WAN on the

router side.

When a SIP call is connected using the NAT transversal function,

it is not possible to install multiple PJP units in a single segment

and connect a call between them.

Using the SIP Server

Registering the SIP server

information

Note

Notes on SIP server operation

Note

Branch A

Headquarter

Branch B

SIP server

Router Router

Router

01EN_00_PJP-100H_UCGB.book Page 35 Wednesday, August 23, 2006 3:04 PM

Contents

Main OWNERS MANUAL MODE DEMPLOI BEDIENUNGSANLEITUNG IP audio conference system i IMPORTANT SAFTY INSTRACTIONS ii English FCC INFORMATION (for US customers) iii For U.K. customers CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. Note PREPARATIONINTRODUCTION BASIC CALL ADDITIONAL INFORMATION Contents BASIC CALL OPERATIONS INTRODUCTION PREPARATION CONFIGURATIONS Audio conference through networks Features About this manual Supplied Accessories About trademarks Top panel Controls and Functions Right side panel 42 31 Other Display 2006.05.15 09:48:20 1 02 83 4 9567 IP: 192.168.100.200 To configure the settings from a PC To use this unit with a SIP server Preparation Procedure 9 1 2 3 4 Step 1: Connecting this unit 4 3 1 2 Obtaining the IP address automatically IP: 192.168.0.12 To check if the correct network information is obtained If the IP address display is ???.???.???.??? IP: ???.???.???.??? Step 2: Registering the network settings of this unit Page Page Page About installation environment Take the positions of the talkers in consideration Step 3: Installing this unit in the conference room Making a Call 16 4 5 To mute the microphone 192.168.100.20 Page Page Page 20 1 2 3 Answering a Call IP: 192.168.0.10 192.168.100.10 To call another location during a call To answer a call during a call Talking with Multiple Locations When Speaker Mode is set to Divide When Speaker Mode is other than Divide Display and speaker output during multiple connections 192.168.100.20 192.168.100.30 192.168.100.40 [1] 192.168.100.20 [2] 192.168.100.30 [3] 192.168.100.40 Page Configuring Settings 25 4 5 To return to the previous menu without saving the setting (192.168.100.200) [ ] [#] 192.168.100.200 IP Adress Configuring settings using the web menu Managing the address book Setting Menu List Managing address book Configuring network settings Configuring the DHCP server settings Configuring the connection mode Configuring the NAT traversal setting Configuring the SIP server setting Registering the unit name Configuring sound settings Using the web menu Configuring the speaker mode 30 Configuring the room size Configuring the external input/output setting 1 2 3 Configuring general settings Downloading the call history of this unit Setting password for the web menu Restoring the factory settings of this unit Storing the call history Setting the password Restoring the factory settings Editing Address Book Registering a new address Editing an existing address Deleting an address 35 1 2 3 4 Using the SIP Server Registering the SIP server Notes on SIP server operation Page Setting Date and Time 38 1 2 3 Managing the Call History Confirming the System Log Message of This Unit (syslog) The maximum number of locations by the cascade connection Hierarchical Connection of Multiple PJP Units (Cascade Connection) What is cascade connection ? 41 Step 1. Configure the setting of the cascade server. 1 192.168.100.20 192.168.100.30 Updating the Firmware Software Licensing Agreement 43 1 3. General Settings 2 Settings 1. Network Settings 2. Sound Settings 3. General Settings 4. Restore Settings 5. Firmware Update 4 5 Updating the firmware manually 45 2 3 4 5 Troubleshooting Q1: LED indicators do not light up Q2: Web menu setting is not available Q3: Call is impossible Q4: Other problems Resetting the Unit Page Obtaining the Setting Information for Support on this Unit Obtaining the setting information Obtaining the audio characteristic ADDITIONAL General Operating environment Specifications Notes for Transfer/Disposal of This Unit OWNERS MANUAL MODE DEMPLOI BEDIENUNGSANLEITUNG IP audio conference system