Using the SIP Server

Calling another unit by dialing the user

ID

You can call another unit by dialing the user ID if it consists of only the numbers.

Example: SIP address of this unit is 200@server1.net, and another unit is 201@server1.net

You can call another unit only by dialing “201”.

Display in SIP server operation

Initial display

The SIP address of this unit is displayed in addition to the information usually displayed (page 7).

Lights up

when using the SIP server IP address of this unit

Notes

You can call only the unit which belongs to the same domain as this unit.

If you want to call another unit which belongs to another domain, register its SIP address in the address book beforehand and call by using the address book.

IP: 192.168.0.10

tokyohq@sales.yama...

2006.05. 15 09: 48: 20

Menu :Address

SIP address of this unit

Display during call

The SIP addresses of this unit and other units are displayed during the call.

SIP address of this unit

tokyohq@sales.ya...

osaka@sales.yamah...

nagoya@sales.yama...

tokyo@tech.yamaha...

Menu :Address

SIP address of the destination unit

Other displayed information and speaker modes are identical to those in calls using the IP address (pages 15 and 22).

36

Page 40
Image 40
Yamaha PJP-100H Display in SIP server operation, Tokyohq@sales.yama 2006.05 09 48 Menu Address, Initial display