Press, To cancel the firmware update | Yamaha PJP-100H guide

2Start “Command Prompt” in the Windows PC

which can access the web menu of this unit.

When using Windows XP, select the “Start” menu → “All Program” → “Accessories” → “Command Prompt”.

3Enter and run the following command. tftp -i [IP address of this unit] put [file name of the firmware]

Example:

tftp -i 192.168.0.6 put pjp_100h_113.bin

The confirmation of the firmware version is required.

4Press .

The confirmation whether the firmware update is carried out is required.

5Press .

When the installation is complete, the firmware update process starts automatically.

The firmware update process takes a few minutes to complete.

MIC MUTE (red LED) on the top panel of this unit flashes during the firmware update process. Do not turn this unit off while MIC MUTE (red LED) flashes.

To cancel the firmware update

In step 5, press .

■When the firmware update is complete

This unit restarts automatically.

Check the version number in the “Program Version” field on the top of the web menu to confirm that the new firmware is installed properly.

Updating the Firmware

CONFIGURATIONS

English

45

Image 49

Yamaha PJP-100H owner manual Press, To cancel the firmware update

Contents

IP audio conference system Important Safty Instractions FCC Information for US customers Iii Contents Settings from the PC FeaturesAudio conference through networks Arrayed microphones and speakers for high audio quality About this manual Supplied AccessoriesAbout trademarks Top panel Controls and Functions DC in 12V terminal Right side panelAudio in terminal Audio OUT terminal Serial label OtherSerial terminal Arrayed speakers Bottom panel Menu Address 192.168.100.200Display To configure the settings from a PC Preparation ProcedureTo use this unit with a SIP server LAN cable Standby mode Connecting this unitTo exit the standby mode and switch this unit on again If the IP address display is ???.???.???.??? Registering the network settings of this unitObtaining the IP address automatically To check if the correct network information is obtained Settings Network Settings Sound Settings General Settings Menu Settings Call History OnlineNetwork Settings IP Address Subnet Mask Default Gateway IP ???.???.???.??? Menu Address IP Adress 192.168.100.200 Enable DisableSubnet Mask 255.255.255.000 Press or to select 3. Default Gateway Then press Default Gateway 000.000.000.000DNS Server 000.000.000.000 Press or to select 4. DNS Server, Then press About installation environment Installing this unit in the conference roomTake the positions of the talkers in consideration Making a Call Menu Address CancelCalling another unit by specifying an IP address 192.168.100.20 To make a call involving multiple Locations 192.168.0.10To mute the microphone Address Book Headquarter Branch a Branch B Calling another unit using the address bookCalling another unit in online status Online 192.168.0.20 Calling another unit using the call history Online 192.168.0.20 CancelCall History Headquarter Branch a Press or to select 2. Call History, Then press Call History Headquater Branch a Cancel To deny the call Answering a CallWhile having an incoming call, press Carry out the procedure in Answering a Call Carry out one of the following procedure during a callTalking with Multiple Locations To call another location during a call When Speaker Mode is other than Divide When Speaker Mode is set to Divide192.168.100.20 192.168.100.30 Menu Address 192.168.100.20 192.168.100.30 192.168.100.40 Menu Address Press during call Change Location 192.168.100.20 192.168.100.30 Menu AddressPress or to select 4. Change location Then press Configuring settings using the keys on this unit Configuring SettingsPress or to select the menu category Then press To return to the previous menu without saving the setting Configuring settings using the web menuTo confirm the setting, press Change the parameter Configuring network settings Setting Menu ListManaging address book information Configuring the connection mode Configuring the Dhcp server settingsConfiguring the NAT traversal setting Configuring the SIP server setting Selecting the audio pickup area Microphone mode Configuring sound settings Configuring the speaker mode Using the web menu Configuring the external input/output Setting Configuring the room sizeConfiguring the audio connection function Configuring general settings Restoring the factory settings Setting the passwordStoring the call history Registering a new address Editing Address Book Editing an existing address Deleting an address Registering the SIP server information Using the SIP ServerWeb menu, click SIP Server Click Submit Tokyohq@sales.yama 2006.05 09 48 Menu Address Display in SIP server operationCalling another unit by dialing the user Initial display Web menu, click Sntp Server Setting Date and Time Managing the Call History Contents of call history fileViewing the call history file Confirming the System Log Message of This Unit syslog Web menu, click Syslog Setting Maximum number of locations by Cascade connection What is cascade connection ? Configure the settings Cascade clients Configure the setting of the cascade serverDisplay in cascade connection Software Licensing Agreement Updating the Firmware Firmware Update ver. DT1.12-V1.6x Yes 2. No Settings General Settings Restore Settings Firmware UpdateFirmware update process takes a few minutes to complete When the firmware update is complete Updating the firmware manually Press To cancel the firmware update Q1 LED indicators do not light up Troubleshooting Web menu cannot be opened Q2 Web menu setting is not available Call cannot be originated Q3 Call is impossible Audio is interrupted Q4 Other problems Restore Settings Yes 2. No Resetting the UnitResetting using the keys on this unit To cancel resetting in the middle Web menu, click Restore Factory Settings Resetting using the web menuClick Restore Factory Settings Obtaining the audio characteristic information Obtaining the Setting Information for Support on this UnitClick Download Setting Information in the web menu Click Save Specifications Page All rights reserved