MIDI REMOTE function
194 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section

Here you can make settings for GPI (General Purpose

Interface) input/output, used to transfer control signals

between the PM5D and an external device.

AGPI IN port

These are the numbers of the GPI IN ports for which

you can make settings.

BGPI IN status

The yellow bar indicates the input signal voltage state

of the corresponding port. If the bar is not shown, the

signal is in the grounded state; if the bar is displayed to

the right edge, the signal is at the high level state. Use

the POLARITY (3) field to select whether the signal is

active when low or high.

CPOLARITY

This selects how GPI IN on/off will be detected. You

can choose Low Active (active when the key is

grounded) or High Active (active when key is open, or

when a high level signal is input).

DFUNCTION

EPARAMETER

These fields indicate the function that is executed when

the corresponding GPI IN port becomes active (or the

function that is controlled by the voltage value being

input from the GPI IN port), and option parameters

for that function.

To edit the settings, click the button at the left to

open the GPI IN PORT ASSIGN window, and select

the function and parameter from the following table.

GPI screen
GPI
1 2

3 4 5

FUNCTION PARAMETER PM5D operation
NO ASSIGN — No assignment
MONITOR
DIMMER ON Switches the Dimmer
function on/off
SOURCE=
[monitor source
name]
Switches the monitor
source
MONO ON Switches the monitor sec-
tion [MONO] key on
TALKBACK
ON
LATCH
Switches the Talkback
function on/off (latched
operation)
UNLATCH
Switches the Talkback
function on/off (unlatched
operation)
CH ON-
LATCH [channel name] Switches the channel on/
off (latched operation)
CH ON-
UNLATCH [channel name] Switches the channel on/
off (unlatched operation)
FADER
LEVEL [channel name]
Modifies the fader value
(LEVEL parameter)
according to the voltage
SUR-
ROUND PAN
FRONT-REAR
PAN [SEL] according to the voltage.
LEFT-RIGHT
PAN [SEL]
Modifies the surround pan-
ning (left/right) of the
selected channel accord-
ing to the voltage.
FRONT-REAR
PAN [ODD]
Modifies the surround pan-
ning (front/rear) of the
selected odd-numbered
channel according to the
voltage.
LEFT-RIGHT
PAN [ODD]
Modifies the surround pan-
ning (left/right) of the
selected odd-numbered
channel according to the
voltage.
FRONT-REAR
PAN [EVEN]
Modifies the surround pan-
ning (front/rear) of the
selected even-numbered
channel according to the
voltage.
LEFT-RIGHT
PAN [EVEN]
Modifies the surround pan-
ning (left/right) of the
selected even-numbered
channel according to the
voltage.
USER
DEFINED
KEY FUNC-
TION
[User Defined
key bank / key
number]
While the external input is
active, executes the same
operation as when the
selected User Defined key
is pressed
USER
DEFINED
KEY LED
[User Defined
key bank / key
number]
While the external input is
active, lights the LED of
the selected User Defined
key
PEAK HOLD
ON
—
Switches the Peak Hold
function on/off
OSCILLA-
TOR ON
Switches the Oscillator on/
off
SOLO ON Switches the Solo func-
tion on/off