The phrase mode includes 15 phrase “jobs” that perform a variety of important functions. To access and use the phrase jobs, press the [JOB] key while in the PHRASE mode. This calls the phrase job list. You can select any job on the list simply by moving the cursor to the required job (use the cursor keys or the data dial) and pressing [ENTER]. You can also move up or
down the list in 
and
keys while holding one of the [SHIFT] keys. An alternative method is to enter the job’s number via the numeric keypad and press [ENTER].
Returning to the PHRASE Mode
The [F6] function key (“Exit”) can be used to exit from any phrase job, and then from the job list thereby returning you to the phrase mode. You can also press the [F6] function key (“Exit”) while holding one of the [SHIFT] keys to directly return to the PHRASE mode.
00: Undo/Redo
This job will “undo” any other phrase job, edit, or record function if it is executed before any other operation is performed. In all cases the affected data is restored to the state it was in before performing the job, edit, or record operation. This job will also undo the last undo operation (redo).
The name of the last operation performed will appear on the display (i.e. the operation which will be “undone”). In the example display, above, a realtime record operation will be undone.
92