Location
The QY300 lets you locate any measure within a song quickly and easily in three ways:
The Measure/Beat Parameter
The large number to the left of the colon in this parameter is the measure number and the small number to the right of the shows the number of the current quarter-note beat within the current measure during playback and re- cording. To go directly to any measure within a song, place the cursor at the measure number and use the [-1/NO]and [+1/YES] keys, the data dial, or the numeric keypad to enter the number of the measure you want to go to. Remember to press [ENTER] after entering a measure number via the numeric keypad. The beat number will always be reset to “1” when you locate a measure.
The Shuttle Dial
The outer ring of the QY300 data dial is a “shuttle” dial that lets you move forward or backward through the current song at varying speed, both during playback and when playback is stopped. The more you rotate the shuttle dial in the clockwise direction the faster you will shuttle forward through the song. The same applies to reverse shuttling in the counter-clockwise direction. If you use the shuttle dial during playback you will be able to monitor the sound of the song while shuttling forward or backward. No monitor sound is available if the shuttle dial is used when playback is stopped.