Step Phrase Recording

The step phrase record mode lets you enter phrases note-by-note, with precise control over the timing, length, and loudness of each note. You can record complete phrases using the step mode, or use it to brush-up and add data to an existing phrase.

Select the PHRASE Mode & an Empty User Phrase

Press the [PHRASE] mode key to select the PHRASE mode, place the cursor at the “category” section of the phrase number and select “US” (user), then move the cursor to the phrase number and select an empty “user” phrase (the programmable user phrases are numbered US---001 through US---100). Empty phrases are indicated by a row of asterisks (“********”) following the phrase number.

If for some reason all 100 user phrases contain data use the “Clear

Phrase” job described on page 102 to clear a phrase for recording Patterns

Engage the Record Ready Mode

Press the key to engage the record ready mode. The red LED above the

key will light.

Select the Step Record Mode

Press the [F5] function key (“STEP”) to select the step record mode.

81