•If more than 1 measure

is split and a “Fill” is specified as the destina-

tion section, an “Illegal Input” error will occur since fills can only be one measure long.

•This job does not copy voice or play effect data from the source style.

The upper “Style” parameter selects the source style — i.e. the style which is to be split: “001” ... “100”.

The upper “Section” parameter selects the source section — i.e. the section of the source style which is to be split: “Intro”, “MainA”, “MainB”, “FillAA”, “FillBB”, “FillAB”, “FillBA”, “Ending”.

The “M” parameter specifies the measure at which the source section of the source style is to be split: “1” ... “8”, depending on the length of the source style (if “1” is selected the entire section is moved to the specified destination).

The lower “Style” parameter selects the destination style — i.e. the style to which the latter half of the split source section is to be moved: “001” ...

“100”.

The lower “Section” parameter selects the destination section — i.e. the section of the destination style to which the latter half of the split source section is to be moved: “Intro”, “MainA”, “MainB”, “FillAA”, “FillBB”, “‘FillAB”, “FillBA”, “Ending”.

After setting the parameters as required press [ENTER] to execute the Split Pattern job. The metronome icon will appear on the display while the data is being processed, then “Completed” will appear briefly when the job is done. Press the [F6] key (“Exit”) to return to the job list, or a mode key to go directly to the selected mode.

04: Init Play Effect

Resets all playback effect settings for the specified track to their default values.

The “TR” parameter selects the track(s) to be affected by the Init Play Effect job: “1” ... “8” for individual tracks, or “All” for all tracks.

After setting the parameter as required press [ENTER] to execute the Init Play Effect job. The metronome icon will appear on the display while the data is being processed, then “Completed” will appear briefly when the job is done. Press the [F6] key (“Exit”) to return to the job list, or a mode key to go directly to the selected mode.

89