The QY300 utility mode includes a number of functions that are important for general operation — e.g. MIDI data handling, interfacing with external equipment, ABC system operation, and more. Press the [UTILITY] mode key to go to the UTILITY mode, then use the [F1], [F2], and [F3] function keys to select the system, input filter, or fingered zone parameters described below. Press the [F6] function key (“Exit”) to exit from the UTILITY mode and return to the previously-engaged mode when done (you can also press any other mode key to go directly to the selected mode).

System Parameters

The UTILITY mode system parameters include master tuning and basic MIDI settings that are essential for communication with external equipment. To access the system parameters press the [F1] function key (“System”) after engaging the UTILITY mode.

Master Tuning

This parameter tunes the QY300 tone generator over approximately a whole tone range (+ one semitone) in l-cent increments (a “cent” is 1/100th of a semitone). The range is from “-99” through “+00” to “+99”. A setting of “+00” produces normal pitch. Negative values tune down and positive values tune up.

nMIDI Synchronization

Determines whether the QY300 is controlled by its own internal clock or MIDI clock data from an external device.

When set to “Int” the QY300 is controlled by its own internal clock. When set to “Ext” the QY300 is controlled by a MIDI clock signal received from an external device such as a sequencer or music computer. Please note that the QY300 will not run on its own when this parameter is set to “Ext.”

115