Yamaha QY 300 Fingered Chord Zone Assignment, Ex, Sys, Note, Bend, Poly, After, Change, Ch. After, Program Change

Note		Note data filter. This filter should normally be turned off to
		allow reception of all note data.
Pitch	Bend	Turn this filter on if you do not want to record pitch bend data
		received by the QY300, or you simply don’t want received pitch
		bend data to affect the QY300 sound.
Cntrl	Change	This filter can be used to block reception of all control
		change events: modulation, breath controller, volume, sustain
		pedal, etc. Control change bank select numbers (0 and 32)
		are affected by the Program Change filter (below), not the
		Cntrl Change filter.
Program Change		The program change filter can be turned on if you want to switch
		voices on an external keyboard or other controller without
		switching the QY300 voices as the same time.
Poly	After	As mentioned aove, aftertouch generates a lot of data that can
		rapidly fill the available memory if used indiscriminately. When
		on, this filter blocks reception of polyphonic aftertouch data.
Ch. After		Similar to the polyphonic aftertouch filter, but this filter blocks
		reception of monophonic (channel) aftertouch data.
Sys	Ex.	Blocks reception of all system exclusive data when turned on.

Fingered Chord Zone Assignment

ABC chord changes will be ignored during step or realtime recording of

any track other than the chord track, and in the edit or job modes.

The QY300’s advanced ABC system can be controlled from an external key- board, making it useful as an ABC expander module. The Fingered Chord Zone utility function sets the range of notes in which chords played will be recognized by the QY300 ABC system.

117