Velocity

This parameter controls the velocity (loudness) of the note. The range is from

001 to 127. Standard velocity values can be entered via the numeric keypad: place the cursor at the volume symbol to the right of the velocity value and use the numeric keypad to directly enter the desired volume symbol. The available volume symbols are marked on the keys. The numeric velocity value will change accordingly.

nDeleting Events

Notes and other events (sustain on/off, pitch bend, etc.) can be deleted by placing the cursor at the line corresponding to the event to be deleted, and then pressing the [F1] function key (“Delete”).

nChanging Tracks

To change tracks without having to return to the SONG mode press the [F3] function key (“ChngTr”). The cursor will move to the track number at the top of the screen. Use any data entry method to specify the number of the track you want to change to (use the [+1/YES] key or data dial to select the tempo track — see “Editing the Tempo Track”, page 112), and then press the [ENTER] key.

nAssigning a Track Name

Each track can be assigned a track name for easy identification when editing. To assign a name to the current track, press the [F4] function key (“TrName”). The cursor will move to the track name location at the top of the screen. You can now use the standard QY300 name entry procedure to enter a name of up to 8 characters (see page 54 for an example of the name entry procedure). Press the [F4] key again or the [F6] key (“Exit”) when done.

Insert Mode Editing

The edit insert mode is used to insert new notes and other events at a specified location in the pattern.

Place the Cursor at the Insert Location

Move the cursor to the edit line corresponding to (or near to) the location at which you want to insert the new data.

Engage the Insert Edit Mode

Press the [F2] function key (“Insert”) to switch to the insert edit mode.

107