Set the Time Signature (new songs only)

Move the cursor to the time signature parameter and set as required. The time signature cannot be changed if the song already contains data.

Record

 

Press the

key to begin recording. The step record display shown below

will appear.

 

Set the Note Parameters as Required

Move the cursor to the note length, velocity, and gate time parameters and set as required.

When the cusor is located at the note length parameter the numeric keypad can be used to enter the note lengths marked on the keys. The dot key (the [0] key) can be used to add one or more dots to the currently selected note length. In-between values can be entered using the [-1/NO]and [+1/YES] keys or the data dial, or by using the numeric keypad while holding a [SHIFT] key.

When the cursor is located at the velocity parameter, the numeric keypad can be used to directly enter the dynamic values marked on the keys (pp, mf, etc.). In-between values can be entered using the [-1/NO]and [+1/YES] keys or the data dial, or by using the numeric keypad while holding a [SHIFT] key.

30