Moving Around In the Note Display

You can move the cursor down to the note display (the note pointer will appear filled) and move the note pointer to any position at which you want to enter a note, or to any note that you want to delete. You will actually hear the appropriate note or chord when the note pointer is moved to an existing note sym- bol. When you move the note pointer past the end of the note display, the next measure will appear. If you move past the last measure in the phrase, the first measure of the phrase will appear.

The Step Mode Function Keys

The six function keys immediately below the display provide access to a number of handy functions in the step record mode.

[F1] - “Rest”

Enters a rest of the currently selected note length at the note pointer position.

 

 

[F2] - “Tie”

Lengthens the previously entered note by “tying” another note of the same

 

length and pitch to it. An alternative method is simply to change the length

 

of the note as required via the note length keys on the numeric keypad.

 

 

[F3] - "Delete"

Deletes the note or chord at the note pointer.

 

 

[F4] - “BkDelt”

Moves the note pointer backward by the currently selected note length and

 

deletes the corresponding note or chord.

 

 

[F5] - “LoKey”

Displays the lowest range of the keyboard (scrolls the keyboard display two

 

octaves to the right). Press again to return to the normal “centered” display.

 

 

[F6] -- “HiKey”

Displays the highest range of the keyboard (scrolls the keyboard display two

 

octaves to the left). Press again to return to the normal “centered” display.

The Measure/Beat/Clock Display

The “Meas” area of the step record display shows the current position of the note pointer in measures, 1/4-note beats, and clocks (there are 96 clocks per 1/4 note). If you’re not sure what measure you’re seeing on the note display while recording, check the measure/beat/clock display.

32