The song mode includes 24 song “jobs” that perform a variety of important functions. To access and use the song jobs, press the [JOB] key while in the SONG play mode. This calls the song job list. You can select any job on the list simply by moving the cursor to the required job (use the cursor keys or the data dial) and pressing [ENTER]. You can also move up or down the list

in 1-page steps by using the cursor and keys while holding one of the [SHIFT] keys. An alternative method is to enter the job’s number via the numeric keypad and press [ENTER].

Returning to the SONG Mode

The [F6] function key (“Exit”) can be used to exit from any song job, and then from the job list thereby returning you to the normal song play mode. You can also press the [F6] function key (“Exit”) while holding one of the [SHIFT] keys to directly return to the SONG mode.

00: Undo/Redo

The last operation performed is "forgotten" by the UNDO job

whenever the SONG or PHRASE step record mode is engaged, even if the step record mode is exited without actually recording any data.

This job will “undo” any other song job, edit, or record function if it is executed before any other operation is performed. In all cases the affected data is restored to the state it was in before performing the job, edit, or record operation. This job will also undo the last undo operation (redo).

The name of the last operation performed will appear on the display (i.e. the operation which will be “undone”). In the example display, above, a quantize opersation will be undone:

Press [ENTER] to execute the Undo/Redo job. The metronome icon will appear on the display while the data is being processed, then “Completed” will appear briefly when the job is done. Press the [F6] key (“Exit”) to return to the job list, or a mode key to go directly to the selected mode.

34