Direct Save

Press the [F5] function key (“Save”) from the SONG, PATTERN, PHRASE, or CHAIN mode to go directly to the corresponding, disk save display.

The disk write-protect slide must be in the write-enable position to perform a save operation. If it is

not, the “Write Protected!” error message will appear when you attempt to execute the save op- eration.

After specifying the song, style, or phrase to be saved (there’s no need to specify a file to be saved from the CHAIN mode since all data is saved), and the file name under which the data is to be saved, press the [ENTER] key to begin the save operation.

If the specified file name already exists on the disk, the QY300 will ask you to confirm that you want to overwrite the existing file with the “Delete Old Data?” display.

You can use the [F6] function key (“Exit”) to exit from the disk dis-

play at any time except during the actual save operation.

Press the [+1/YES] key to go ahead with the save operation, or the [-1/NO]key to cancel. An “Executing” bar graph will appear while the data is being saved, then the SONG, PATTERN, PHRASE, or CHAIN mode display will reappear.

120