The QY300” CHAIN mode makes it possible to specify a sequence of up to 10 songs to be played back automatically. Each song within the chain can be repeated up to 99 times.

Engage the CHAIN Mode

Press the [CHAIN] mode key to go to the CHAIN mode. The CHAIN mode display shows the “chain” numbers from 1 to 10.

Program the Chain

To program a sequence of songs for playback, place the cursor at the appropriate chain numbers and use any data entry method to enter the required song numbers. The number following the song name is the number of times that song is to be repeated. Place the cursor at the repeat number and use any data entry method to set the number of repeats for each song.

In the example chain shown here, the first two songs in the chain will play through in sequence, then the third song will be repeated twice.

Play the Chain

While still in the CHAIN mode, press the key to play back the programmed chain. Playback will stop after the last song. You can also press the key to stop playback at any time.

113